Q: Jinqian Machinery: twin-screw pelletizing machine operation steps
Twin-screw pelletizer is divided into different types, each operation process will be somewhat different, the operator must have a detailed understanding of the equipment, skilled operation, in order to allow the normal operation of the equipment, the correct installation and commissioning of equipment, must be carried out in accordance with the formal operating procedures. Jinqian machinery and equipment sales department (plastic machine manufacturers) briefly introduced, twin-screw pelletizing machine operation steps are how.
First of all, before starting the machine to do the corresponding preparatory work, twin-screw granulator equipment, the extruded material needed in the use of the process must meet certain dry requirements, if not meet the use of standards, must be dried. More equipment models, the equipment parts according to different specifications and sizes, in strict accordance with the installation order. Install the compressed air pipe in the equipment, install the core die electric heating rod head heating ring, and check the water system. Adjust the size of the space in the mouth die and other places to ensure that the gap is even, and be sure to align the centerline of the host equipment and auxiliary equipment.
A: Secondly, after normal operation of the twin-screw pelletizing machine, to control the screw and head, be sure to control the temperature, not too high or low temperature, the temperature is too high will cause the plastic to melt, the temperature is too low will damage the equipment parts. When starting operation, to open the equipment at low speed, check whether the equipment has abnormal sound, the ammeter has no overload situation, check whether the pressure gauge index is normal, to avoid long idling equipment to avoid wear and tear of equipment parts.
Finally, twin-screw pelletizing machine to complete production, to squeeze the plastic clean equipment, turn off the equipment power, which includes turning off the host power and auxiliary power, the next step is to disassemble the equipment, the equipment inside, each part to clean, clean up after the parts to apply a certain amount of oil, maintenance. After cleaning and maintenance, to assemble the equipment, cleaning and maintenance work is the key to the whole process, because the formal cleaning and maintenance, to extend the service life of the equipment, but also the equipment in the next use process, to ensure normal operation.
Jinqian machinery and equipment sales department (plastic machine manufacturers), the twin-screw extruder and twin-screw pelletizer R & D technology has more than 10 years of experience in the enterprise, specializing in all types of plastic processing extrusion equipment, research and development, manufacturing and maintenance and sales. Product series: used twin-screw pelletizer/extruder, new twin-screw pelletizer/extruder, plastic pelletizer, used single-screw submachine new and used, and supporting auxiliary equipment, etc.
*** Translated with www.DeepL.com/Translator (free version) ***